2019 China New Design Low Melt FFS Roll Stock - EVA Packaging Film for Rubber Additives – Zonpak
2019 China New Design Low Melt FFS Roll Stock - EVA Packaging Film for Rubber Additives – Zonpak Detail:
ZonpakTM EVA packaging film is specially designed for making little bags of rubber additives (e.g. 100g-5000g) with a form-fill-seal (FFS) bagging machine. Various rubber additives or chemicals (e.g. peptizer, anti-aging agent, curing agent, cure accelerator, rubber process oil) are commonly used in the rubber mixing process, and only little amounts of these materials are needed for each batch. So these little packages can help the material users increase work efficiency and avoid material waste. The film is made of EVA resin (copolymer of ethylene and vinyl acetate) which has a specific lower melting point and good compatibility with rubber or resin materials. So the bags together with the materials contained can be direct put into a mixer. The bags will melt and disperse into the rubber compound as a minor effective ingredient.
Films with different melting points (65-110 degree Celsius) and thickness are available for different using conditions.
|
Technical Datas |
|
| Melting point | 65-110 deg. C |
| Physical properties | |
| Tensile strength | MD ≥16MPa TD ≥16MPa |
| Elongation at break | MD ≥400% TD ≥400% |
| Modulus at 100% elongation | MD ≥6MPa TD ≥3MPa |
| Appearance | |
| Surface of the product is flat and smooth, there is no wrinkle, no bubble. | |
Product detail pictures:
Related Product Guide:
The consumer fulfillment is our primary goal. We uphold a consistent level of professionalism, top quality, credibility and service for 2019 China New Design Low Melt FFS Roll Stock - EVA Packaging Film for Rubber Additives – Zonpak, The product will supply to all over the world, such as: Hungary , Cape Town , UAE , We always insist on the management tenet of "Quality is First, Technology is Basis, Honesty and Innovation".We are able to develop new products continuously to a higher level to satisfy different needs of customers.
By Chris Fountas
from Munich
- 2017.11.20 15:58
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
By Josephine
from moldova
- 2018.06.18 19:26
